Alex Ruben
How To Fix the Canon G2010 Printer P07 Error in 2025 | Troubleshooting Tips
Having a Canon G2010 throwing up a P07 error can be pretty annoying, especially if you’re in the middle of something. It’s a common issue usually tied to the ink absorber being full or some internal counter glitch. Sometimes, just turning it off and on doesn’t cut it — you need to get a bit deeper. This guide walks through some real-world steps to reset the ink absorber counter, hopefully stopping that error from popping up and letting you keep printing. Just a heads up, messing with service mode isn’t exactly a walk in the park — if you’re not comfortable, it might be worth seeking professional help. But hey, if you’re a bit tech-savvy, these steps can save you a trip to the repair shop.
How to Fix the Canon G2010 P07 Error
Access Service Mode and Prepare the Printer
First thing, turn off that printer. No point in messing around with it while it’s powered on. Once off, you’ll need to get into service mode. Here’s where it gets a little tricky but if you follow along carefully, it should work:
- Hold down the Stop button (the one with the triangle or exclamation mark).
- While holding Stop, press and hold the Power button.
- Keep holding Power, then release the Stop button.
- Press the Stop button five times quickly.
- Release the Power. If all goes well, the power LED will turn solid green, which means you’re in service mode.
This sequence is kind of weird, but on some printers it takes a couple of tries, so don’t get discouraged. If the LED doesn’t turn green, try the sequence again. Because of course, Windows and printers love to make things more complicated than they should.
Download and Run the Canon Service Tool
This part is the most critical. You need the Canon Service Tool — it’s a little piece of software that tricks the printer into resetting its counters. It’s not officially public, so you gotta find it — a popular one is “IJ Printer Reset Tool” or similar. Be careful downloading it from unofficial sites, but many folks swear by sites like memstechtips or dedicated forums. Make sure you get the latest version to avoid issues.
Once downloaded, extract the files and find the executable (usually a .exe file). Connect your printer to your PC via a USB cable. On one setup it worked on the first try, on another… not so much. If the software doesn’t detect the printer, double-check all connections, try changing USB ports, or restart both the printer and your PC.
Reset the Ink Absorber Counter
This is the key part. Inside the service tool, look for the “Clear Ink Counter” button or tab. It’s usually under a menu named something like Maintenance or Tools. Here’s what to do:
- Head to Clear Ink Counter.
- Select the Main absorber, which is the primary ink pad that collects waste ink.
- Hit the Set button — sometimes it’s labeled as OK or Reset.
- Wait for the process to finish. You should see a message confirming the counter is now reset to 0% — at least in the software.
- Close the software, disconnect the printer if you want, or just restart the printer.
You might feel like this is a shortcut to making the printer think nothing’s wrong. Sometimes it works, sometimes it doesn’t, but on most setups, it’s enough to clear the P07 error. I’ve had cases where it took a couple of tries or re-entering service mode, but it’s rarely impossible.
Power Cycle and Test
Turn off your printer using the Power button, wait about 10 seconds, then turn it back on. Sometimes the error will go away immediately, other times it sticks around for a bit. If it’s gone, great — but if not, and the error still shows, double-check the ink absorber area and ensure no hardware issues are lurking. Also, check for any firmware updates via Canon’s official website — sometimes an update can fix internal bugs.
Extra Tips & Troubleshooting
Here’s some quick advice based on real experience:
- Make sure your printer’s firmware is up to date. Sometimes bugs causing errors like P07 get patched in updates. Check under Settings > Maintenance > Firmware Update.
- Be patient with the process — sometimes, the reset takes a couple of attempts or a reboot of the printer after the reset.
- If the error persists or comes back after a day or two, consider replacing the ink absorber pads. That’s more involved, but if your printer’s internal waste ink pad is saturated, you might need to do a full internal clean or pad replacement.
Wrap-up
Getting rid of the P07 error on the G2010 isn’t perfect — it’s kind of a workaround, but it’s enough to get the printer back in action without a costly repair. Just remember, tinkering with service mode and counters can void warranty on some models, so proceed with caution. Hopefully, these steps help you fix the error without much trouble, and you’re back to printing just like before.
Summary
- Enter service mode using button combo.
- Download and run the Canon Service Tool.
- Reset the ink absorber counter inside the tool.
- Power cycle the printer and test.
Conclusion
This whole process might feel a bit shady, but it’s proven to work on quite a few G2010s. If you’re comfortable fiddling around in service mode and using third-party tools, it can save a lot of money and hassle. Otherwise, just keep in mind that sometimes these errors are a sign of hardware saturation or aging parts, so if it keeps coming back, a professional look might be necessary. Fingers crossed, this does the trick for you — worked for a bunch of users, so maybe it’ll do the same for you.